Permanent Monitoring and Supervision System (7×24) for Optical Networks

Fiber Optic based networks belonging to Telecom Service Provide as well as Carriers that transport these services are requiring an a continuous growth of bandwidth while maintaining an optimal quality of service settle thru the use of Service Level Agreements (SLA’s) with the clients granting that the transport of data from point to point does undergo alterations or loss in quality.

Transport data at high speed in Fiber Optic based networks (greater than 10Gbps per service) has an inherent penalty intrinsically linked to the Fiber Optic physics: attenuation due to splices that degrade with time, path of fiber through panels under stress due to over exceeding recommended curvature layouts, increase or fluctuation of PMS, reflection generated in parch panels, etc. Thus there is a need to monitor the Fiber Optic network infrastructure to make sure the SLA agreement between carriers, operators and clients are met.

WoneWatch is a modular, scalable that out performs the BERT Tester, multiprotocol probes and OTDR solution, allowing managers of Fiber Optic networks the possibility to permanently (7×24) monitor the QoS being delivered in the link as well as the detection of fiber breaks.

The System consists of a 19” rack mounted chassis, filed deployable (and overlayed on the networks) and a software platform that monitors in real time, capable to store and detect alarms, events and QoS statistics. The chassis is the two types, one modular that offers the capacity to house 4 to 12 slots can be configured to hold and combine BERT (Bit Error Rate Tester), Micro OTDR (lower links 50 Km) and Multiprotocol probes for QoS surveillance for permanent monitoring of key locations for example: critical links, singular points in the network, network edge, etc, and other the 1u for OTDR-LR (up to 240 Km) and Optical Performance Monitoring (OPM).

  • Modularity and Scalability
  • Permanent guarantee (7×24) fiber optic networks quality of service
  • Low cost monitoring system in comparison to traditional BERT and OTDR (up to 240 Km) (test and instrumentation equipment)
  • Permanent (7×24) monitoring integrated, delivering BERT test capabilities allowing to observe and determine the progressive degrading of the quality of service, as well as OTDR capabilities that help determine instant location of fiber breaks
  • The Optical Performance Monitor measures and analyses the quality of the optical signal (wavelength, optical power and optical signal to noise ratio (OSNR)) in each DWDM channel
  • Higher efficiency and agility in the preventive and reactive network maintenance tasks
  • Availability of a historic event log file, helps to perform data mining tasks, detection of critical locations in the net rending into a better network infrastructure
  • High density: a single unit allows for the deployment of 48 microOTDR’s and up to 36 lambdas DWDM monitoring
  • Flexible to be installed on any network topology: point to point, ring, mesh, etc
  • Connectivity to other software platforms that are used for networks element identification and maintenance

Mechanical

  • Optria S1, S4 or Optria S12
  • Width: 19” (448 mm)
  • Depth: 280 mm
  • -48 Vdc, 220 Vac
  • Consumption: 80 W/180 W
  • Operative temperature: 0 – 70 ºC
  • Humidity: 5% – 85% without Condensation
  • Backup source
Management

  • Interface: Ethernet 10/100 BT
  • Protocols: SNMP v2, http, XML
  • Local Craft Terminal
  • Element Management System
  • GUI
Multiprotocol Sensors

  • DWDM-100GHz, CWDM
  • Gigabit Ethernet (up to 10Gbps)
  • STM-1/4/16/64
  • OTU-1/2
µOTDR Module

  • CWDM
  • Loss of Signal (LOS) Detection
  • Distance to Break Fiber in meters
  • Monitoring General Alarms
  • Reach: 50 Km
OTDR-LR Module

  • Height: 1u (44 mm)
  • Typical OTDR Traces
  • Selecting Work Wavelength
  • View multiple traces
  • Alarm Thresholds
  • Reach: Up to 240 Km
OPM Module

  • Height: 1u (44 mm)
  • Single or Multi-channel DWDM
  • Measures:
    • Wavelength
    • Optical Power
    • OSNR
  • Alarm Thresholds
BERT Module

  • DWDM-100GHz
  • 10 Gbps Transmision Rate
  • PRBS Payload
  • OTU-2 Encapsulation
  • Statistics Analysis G.7710 and threshold configuration (alarms)
  • Analysis or Corrected (FEC) and Generated errors
  • Transport Alarm Monitoring
  • Reach: 80 Km without amplification
QoS Measurements

  • Statistics RMON (RFC2819)
  • ITU G.7710 (Ethernet, SDH, OUT)
  • ITU Y.1731 (Ethernet)
  • Cyclic Historic Log: 1 month
Safety

  • NEBS level 3 (Bellcore, SR-3580)
  • EMC:
    • EN 55022:1998
    • EN 50081
    • EN 55011
  • Inmunity:
    • EN 61000-4-2/4/5:1995
    • EN 61000-4-3:1996
    • EN 61000-4-11:1994
  • Low Voltage:
    • EN 60950:1995

Please, use our contact form to request any documentation about this product .